To complete the assembly in this section, I have prepared the following parts: B (Gold), C (Bronze), D (White Gold), F1 (Metallic Gray), F2 (Metallic Gray), G (Gold) x2, I1 (Blue), I2 (Blue), J1 (Light Gray), J2 (Light Gray), K1 (Light Blue), K2 (Light Blue) Metal 3D Sticker.
I assembled part number G-31 into the pin of part number D-10, assembled part number D-11 into the remaining side of part number D-10, then I pasted metallic 3D sticker 11 into the left side, number 10 was pasted into the right side of part number D-11. I prepared 2 of each to get 2 completed parts on the left and right. Assembled part number K1-12, K1-13 into the front of the completed part on the left and right. This completed part was assembled into the pin of part number B-22. Part number B-21 will be assembled into the remaining part to match with part number B-22.
MGEX Strike Freedom - Part D-10, Part D-11 and Part G1-31
MGEX Strike Freedom - Part D-10, Part D-11 and Part G1-31
MGEX Strike Freedom - Decal metallic 3D sticker number 10 and 11
MGEX Strike Freedom - Part B-22 and Part B-21
MGEX Strike Freedom - Part B-22 and Part B-21
MGEX Strike Freedom - Part finish 1
In the next part i assemble part no. J1-30 and J2-30 to the outside at the back of part no. C-28. assemble part no. I-8 to the front of part no. C-28, part no. I1-9 and I2-9 are assembled to the top of part no. C-28. in the front of part no. C-28 i assemble part no. J1-26 and J2-26. for the remaining part i need to assemble part no. J1-31 and part no. J2-31 to the outside of part no. C-29, assemble part no. I2-8 to the outermost part. part no. G-32 will be used to connect the 2 completed parts.
MGEX Strike Freedom - Part I1-8, Part J1-30 (Part J2-30) and Part C-28
MGEX Strike Freedom - Part I1-8, Part J1-30 (Part J2-30) and Part C-28
MGEX Strike Freedom - Part I1-9 (Part I2-9), Part J1-26 (Part J2-26)
MGEX Strike Freedom - Part I1-9 (Part I2-9), Part J1-26 (Part J2-26)
MGEX Strike Freedom - Part I2-8, Part J1-31 (Part J2-31) and Part C-29
MGEX Strike Freedom - Part I2-8, Part J1-31 (Part J2-31) and Part C-29
MGEX Strike Freedom - Part finish 1, Part G-32 and Part finish 2
MGEX Strike Freedom - Part finish 1, Part G-32 and Part finish 2 connect
In this part, there are quite a few small parts that will be a bit difficult to assemble, so be careful not to drop the parts as they will be difficult to find. In the next assembly part, I will need to use these completed parts.