Completed the Backpack Unit assembly of the MGEX Strike Freedom (changlong) Model

To assemble this Backpack Unit I have prepared the following parts: B (Yellow Gold), C (Bronze Gold), D (White Gold), G (Gold) x2, H1 (Black), H2 (Black), I1 (Blue), I2 (Blue), K1 (Light Blue), K2 (Light Blue), L1 (Red), L2 (Red), Metal 3D Sticker, Engraved Sticker.

This is my finished video of the mgex strike freedom backpack unit.

I assembled part number D-17 onto Part number B-8, then assembled part number L1-6 onto the pin of part number D-17, assembled part number K1-2 onto the front of part L1-6, I pasted metallic 3D sticker number 12 onto the front, part number H2-10 assembled onto the middle part of part number D-17.

MGEX Strike Freedom - Part D-17 and Part B-8

MGEX Strike Freedom - Part L1-6

MGEX Strike Freedom - metallic 3D sticker number 12

MGEX Strike Freedom - Part K1-12

MGEX Strike Freedom - Part H2-10

MGEX Strike Freedom - Part finish 1

`In this next part I have assembled the finished part 1 to the inside of part number H2-12, part number H2-11 will be assembled on the bottom. part number H2-13 will be assembled on the outside in the middle with the pin of part number H2-12. Assemble part number H2-9 to the top of this part. part number H1-22 will be installed in the groove on the left side, part number H2-22 will be installed in the groove on the right side, I have pasted decal etching sticker 5 and 6 on the left and right sides of the front of the finished part. Part number F1-15 will be installed in the rearmost slot.