Completed the Leg Frame assembly of the MGEX Strike Freedom (changlong) Model Part 3

 

    To complete the Leg Frame Part 3 assembly, I prepared the following parts: B (Gold), C (Bronze), D (White Gold), F1 (Metallic Gray), F2 (Metallic Gray), G (Gold) x2, I1 (Blue), I2 (Blue), J1 (Light Gray), J2 (Light Gray), K1 (Light Blue), K2 (Light Blue) Metal 3D Sticker. I also Prepared the parts completed in Leg Frame Part 2.

This is my finished video of the mgex strike freedom leg frame.

    I assembled part number C-9 into the upper left side of the finished part 1, part number C-10 into the right side of the remaining part that fits the pin of the finished part 1, at the bottom of the calf part of the model I assembled part number C-26 into the left side, and part number C-27 was assembled into the right side. part number F1-11(part number F2-11) was assembled into the inside of part number G-38, then assembled part number G-37 into the remaining side that fits part number G-38. assemble this finished part into the hole on the top of the finished part 1.

MGEX Strike Freedom - Part Finish 1, Part C-9 and Part C-10

MGEX Strike Freedom - Part C-9 Left

MGEX Strike Freedom - Part C-10 Right

MGEX Strike Freedom - Part G-38, Part F1-11(Part F1-12) and Part G-37

MGEX Strike Freedom - Part G-38, Part F1-11(Part F1-12) and Part G-37

MGEX Strike Freedom - connect Part Finish 1

    In this next part I will assemble the feet of the model. Assemble part number G-30 into the upper hole of part number F1-9 (Part number F2-9), part number G-25 will be assembled into the lower hole of part number F1-9 (Part number F2-9). Assemble part number F1-8 (part number F2-8) into the remaining part that coincides with the pin of part number G-30 and part number G-25. Assemble part number C-13 into the back of part number G-24, the upper pin of part G-24 will be assembled into the hole of part number G-25. So I have the finished part 2. Assemble part number D-16 into the front pin of part number G-29, part number G-26 into the back pin of part number G-29, assemble part number G-28 into the remaining side of part number G-29. Assemble part number G-27 into the bottom of the finished part above. I have finished part 3, connect the pin of this finished part 3 to the front hole of finished part 2. assemble part number C-14 to the back. assemble the pin of this part to the bottom of finished part 1.

MGEX Strike Freedom - Part G-30, Part F1-9 (Part F2-9) and Part G-25

MGEX Strike Freedom - Part G-30, Part F1-9 (Part F2-9) and Part G-25

MGEX Strike Freedom - Part F1-8 (Part F2-8) 

MGEX Strike Freedom - Part F1-8 (Part F2-8)

MGEX Strike Freedom - Part C-13 and Part G-24

MGEX Strike Freedom - Part Finish 2

MGEX Strike Freedom - Part G-26, Part G-29 and Part D-16

MGEX Strike Freedom - Part G-26, Part G-29 and Part D-16

.

MGEX Strike Freedom - Part G-28

MGEX Strike Freedom - Part G-28

MGEX Strike Freedom - Part G-27

MGEX Strike Freedom - Part G-27

MGEX Strike Freedom - Connect Part Fish 2 and 3

MGEX Strike Freedom - Part C-26 and Part - C-27

MGEX Strike Freedom - Part C-26 Left

MGEX Strike Freedom - Part C-27 Right

MGEX Strike Freedom - Part K1-13 and part K2-13

MGEX Strike Freedom - Part K1-13 and part K2-13

MGEX Strike Freedom - Part C-14

MGEX Strike Freedom - Part C-14

    In this part, I have prepared decal etching stickers to stick in the following positions: decal etching sticker number 7 is stuck in the middle, decal stickers number 12,13,14,15 are stuck on the left side, decal stickers number 8,9,10,11 are stuck on the right side.

MGEX Strike Freedom - Etching Sticker number 7

MGEX Strike Freedom - Etching Sticker number 12,13,14,15

MGEX Strike Freedom - Etching Sticker number 8,9,10,11

    

    This assembly has completed the leg frame including the legs of the mgex model. The labeling part is a bit difficult, I paid attention and carefully pasted it so it wouldn't fall off, otherwise the assembly will be stable.