Completed the Chest Frame assembly of the MGEX Strike Freedom (changlong) Model Part 1

    I have prepared the following parts of the model: Part A (Multicolored), Part B (Yellow Gold), Part C (Copper Gold), Part D (White Gold), Part E1 (White), Part F1 (Metallic Gray), Part G (Gold) x2, Part H1 (Black), Part K1 (Light Blue), Part L1 (Red), as well as the Metallic 3D Sticker and Etching Sticker.

I have prepared part number B-6, C-5, B-5, F1-2, F1-3 disassembled. Assemble C-5 into the groove of B-5 and B-6. Part number F1-2 will be installed on the pin of Part number F1-3.

MGEX Strike Freedom - Part B-6, Part C-5, Part B-5

MGEX Strike Freedom - Part B-6 and Part C-5

MGEX Strike Freedom - Part B-5 and Part C-5

MGEX Strike Freedom - Part F1-2 and Part F1-3

MGEX Strike Freedom - Part F1-2 and Part F1-3

Assemble the finished part number B-6 on the left, part number B-5 will assemble part number F1-2 and F1-3. Assemble the finished part number C-5 to the left and right bottom of part number F1-2.

MGEX Strike Freedom - Part B-6 and Part F1-2, Part F1-3

MGEX Strike Freedom - Part B-5 and Part F1-2, Part F1-3

MGEX Strike Freedom - Part C-5 and Part F1-2

MGEX Strike Freedom - Part C-5 and Part F1-2

    Turn the finished part to the back, assemble part number F1-6 on the top and part number D-5 on the bottom.

MGEX Strike Freedom - Part F1-6

MGEX Strike Freedom - Part F1-6

MGEX Strike Freedom - Part F1-6

MGEX Strike Freedom - Part D-5

    

    Turn the finished part to the front, assemble part number L1-3 in the middle, assemble part number D-6 on top of part number L1-3. assemble part number C-4 into the groove at the back, assemble part D-3 into the front left pin, part number D-4 into the right side matching the pin of part D-3.

MGEX Strike Freedom - Part L1-3

MGEX Strike Freedom - Part L1-3

MGEX Strike Freedom - Part D-6

MGEX Strike Freedom - Part D-6

MGEX Strike Freedom - Part C-4

MGEX Strike Freedom - Part C-4

MGEX Strike Freedom - Part D-3 and Part D-4

MGEX Strike Freedom - Part D-4

MGEX Strike Freedom - Part D-3

    So, the assembly of part 2 of the MGEX Changlong body has been completed. If you have any questions or find it interesting, please leave a comment below. Thank you!