I have prepared the following parts: B (Gold), C (Bronze), D (White Gold), G (Gold) x2, H1 (Black), H2 (Black), I1 (Blue), I2 (Blue), K1 (Light Blue), K2 (Light Blue), L1 (Red), L2 (Red), Metal 3D Sticker, Etched Sticker. I have also prepared two more components which have been successfully completed from: Backpack Unit, Wing Unit Part 1, Wing Unit Part 2.
This is my finished video of the mgex strike freedom wing unit.
I have assembled part number G-42 into the bottom of Part number I1-4 (Part number I2-4), part number G-41 is assembled into the top of Part I1-4 (Part number I2-4), each part will need to prepare 8 pieces. Assemble part number I1-5 (part number I2-5) into the pin on the other side of part number I1-4 (part I2-4). Metallic 3D Sticker decal number 22 is pasted onto the surface of the part on the front and back sides. Then I will assemble this finishing part into the pin of the Wing Unit Part 1, Wing Unit Part 2.
MGEX Strike Freedom - Part G-41, Part G-42, Part I1-4 (Part I2-4)
MGEX Strike Freedom - Part G-41, Part G-42, Part I1-4 (Part I2-4)
MGEX Strike Freedom - Part G-41, Part G-42, Part I1-4 (Part I2-4)
MGEX Strike Freedom - Part I1-5 (Part I2-5)
MGEX Strike Freedom - Part finish 1, Metallic 3D Sticker decal number 22
Next, I assemble part number G-45 into the bottom of part number G-48, part number G-45 is assembled into the bottom pin of part G-47, part number G-43 is assembled into the top pin of part G-47, after completion, I will assemble these 2 parts together, there will be 2 pins to connect the 2 wings of MGEX, the remaining pin will be connected to the backpack.
MGEX Strike Freedom - Part G-45, Part G-48
MGEX Strike Freedom - Part G-45, Part G-48
MGEX Strike Freedom - Part G-45, Part G-43 and Part G-47
MGEX Strike Freedom - Part G-45, Part G-43 and Part G-47
MGEX Strike Freedom - Part G-45, Part G-43 and Part G-47
MGEX Strike Freedom - connect Part 1 and Part 2
MGEX Strike Freedom - Wing Unit 1, 2 and Part finish 1
MGEX Strike Freedom - Wing Unit 1, Part finish 1
MGEX Strike Freedom - Wing Unit 2, Part finish 1
MGEX Strike Freedom - Wing Unit Complete
MGEX Strike Freedom - Wing Unit Connect 1
MGEX Strike Freedom - Wing Unit Connect 2
MGEX Strike Freedom - Wing Unit Part A
MGEX Strike Freedom - Wing Unit Part A and B
MGEX Strike Freedom - Wing Unit Part A and B connect Backpack
In conclusion, this build will require a lot of extra parts to complete, but the assembly is quite easy as the parts are quite similar. I also finished assembling the wings that connect to the backpack. These Mgex Wings look quite large and wide, have good details and are quite beautiful.