Completed the Arm Frame assembly of the MGEX Strike Freedom (changlong) Model

I have prepared the following parts: A (Multicolor), B (Golden Gold), C (Bronze Gold), D (White Gold), F1 (Metallic Gray), F2 (Metallic Gray), G (Gold) x2, MP1 (Gold), E1 (White), E2 (White), I1 (Blue), I2 (Blue), J1 (Light Gray), J2 (Light Gray), Metal 3D Sticker.

This is my finished video of the mgex strike freedom arm frame.

I assembled part number F1-25 and F2-25 into part number G-14. Install part number G-15 into the other side of part number G-14. Install this finished part into the top pin of part number B-16, part number G-16 assembled into the bottom pin of part number B-16. Install part number B-17 into the hole of part number B-16.

Note: Each type needs to prepare 2 pieces.

MGEX Strike Freedom - Part F1-25, Part F1-25 and Part G-14

MGEX Strike Freedom - Part G-15

MGEX Strike Freedom - Part B-15 and Part G-16

MGEX Strike Freedom - Part B-17

Next, I prepared part numbers G-11, F1-27, f2-27, C-25, G-10. Assemble part number F1-27 and F2-27 to the inside of part number G-11, part number C-25 to the pin of part number G-11 at the back. Assemble part number G-10 to the other side of part number G-11.

MGEX Strike Freedom - Part G-11, Part F1-27, Part F2-27 and Part C-25

MGEX Strike Freedom - Part G-10

Next, I assembled part number G-18 onto part number G-19. Assembled part number C-23 onto the left side, part number C-24 onto the right side. Part number B-18 onto the bottom pin of the finished part.